D-Link DPR-1020 Manual page 178

Setting up AppleTalk Printing in Mac OS 9
may vary slightly depending on what printer driver version you are using. The
procedure described below assumes you are using LaserWriter 8.
To choose a printer connected to the MFP server as your MacOS workstation's
default printer, open the Chooser by selecting Chooser from the Apple menu. Select
the LaserWriter 8 icon on the left. Make sure that AppleTalk is set to Active.
A list of all networked PostScript printers will be displayed as follows.
Double-click the name of the Printer Port you wish to use. The Printer Ports shown
are examples only.
If you have not previously set this printer as the default, your computer will prompt
you for a PostScript Printer Description file. Choose Select PPD.
D-Link DPR-1020 - User Manual 174