Mac Address Filter - D-Link DHP-306AV User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to authorize wireless clients to access your network by their MAC addresses.
When enabled, any client not on the MAC filter list will not be able to access your network.
MAC Address
Select Enable or Disable from the drop-down
Filter:
menu.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual. Click Save Settings to activate and
save.
Note: Make sure to enter the computer you
are currently using to configure the access
point first or you will not be able to access
the configuration utility once you click Save
Settings.
MAC Filter List:
Displays the list of clients in the filter list.
D-Link DHP-W307AV User Manual

MAC Address Filter

37