Dhp-W306Av Side - D-Link DHP-306AV User Manual

Section 1 - Product Overview
Reset Button
Press and hold to reset the
device back to the factory
default settings.
WPS/Eny LED
When enabling WPS, the light will blink
during broadcast. Once connected,
the LED will remain lit 5 seconds and
then will turn off. The LED will start
blinking after the Encryption button
is pushed. The LED will turn off once
the Powerline AV is connected to a
Powerline network.
D-Link DHP-W307AV User Manual
Hardware Overview

DHP-W306AV Side

Simple Connect Button
Push this button to establish a
secure powerline network with
other Powerline AV devices.
WPS Button
Press to start the WPS process. You
will have 120 seconds to start the WPS
process on another wireless device.
10