During the warm-up period, check
the oil pressure indicator (p.
overheat indicator (p.
cooling system indicator (p.
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS
p.
119
−
122
.
6.
If the fast idle button was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
EMERGENCY STARTING
39
),
40
), and
If the battery is discharged or the
41
).
starter motor is inoperative, you can
start the engine manually using the
emergency starter rope supplied with
the motor.
on
ENGINE COVER
LATCHES
(front/rear)
1.
Turn the engine switch key to the
OFF position.
2.
Unlatch and remove the engine
cover.
UNLOCK
OPERATION
6 mm WASHER
6
×
25 mm
FLANGE BOLT
ALTERNATOR
CLAMP
COVER
HOOKS
CLAMP (on the
BREATHER
silencer case)
TUBE
3.
Release the breather tube from the
four clamps.
4.
Remove 6
×
25 mm flange bolt
and washer, and then remove the
alternator cover.
5.
Secure the breather tube to the
clamp of the silencer case.
Take care not to lose the bolt and
washer.
CLAMPS
63