LG GR-L207WVS Service Manual page 26

MICOM FUNCTION
2-1-2. LCD Back Light Control
1. In order to easily view display status on the LCD, LCD Back Light is turned on for a minute in application of initial power,
for a minute in button manipulation and for a minute after closing time from opening time of door.
2. If pressing any display button once with the backlight turned off, buzzer rings and button function is not performed but
only backlight is turned on (If pressing the first button with the back light turned off, only back light ON function is
performed).
3. If pressing the special freezing button and the freezing temperature adjustment button for more than a second, the back
light is turned on and all the graphics of LCD are turned on. If releasing the button, the LCD graphic is displayed in the
previous status and the back light is turned off (check LCD graphic and back light ON/OFF status).
2-1-3. Outside temperature display function
1. Outside temperature sensor at the left U of refrigerator senses ambient temperature and displays the outside temperature
in the left side of "Outside temperature" text on the LCD of the display part.
2. Ambient temperature is displayed up to -9°C ~ 49°C and displayed as "Lo" for less than -10°C and as "HI" for more than
50°C. If the ambient temperature sensor fails, it is displayed as "Er".
3. Since display temperature of outside temperature is temperature sensed by the ambient sensor in the hinge U of the
freezing room, it may differ from the outside temperature display of other household electrical appliances.
2-1-4. Lock function (display button lock)
1. In power application of refrigerator, the only "Release" text is turned on at the right side of lock graphic of LCD with the
lock release status.
2. If desiring to lock the display status and pressing the lock/release button once, "Release" text is turned off at the right side
of lock graphic of LCD and "Lock" text is turned on with lock status.
3. The only buzzer sound rings and function is not performed even if pressing display button other than lock/release key in
the lock status.
4. If desiring to release the lock status and pressing the lock/release button once, "Lock" text is turned off at the right side of
lock graphic of LCD and "Release" text is turned on with lock release status.
2-2. Dispenser use selection
You can select water or ice.
❉ Please select water, slice ice and square ice by pressing
button as you desire.
❉ Please press the push button lightly by catching and pushing in cup.
• The border line is indicated for the selected function.
• "Tak!" sounds if 5 seconds pass after ice comes out.
It is sound that the outlet of ice is closed.
REFERENCE : Please wait for 2-3 seconds in order to take final ice
slices or drops of water when taking out cup from the
pressing switches after taking ice or water.
2-3. Automatic ice maker
• The automatic ice maker can automatically make 8 pieces of ice cube at a time, 80 pieces a day. But these quantities may
be varied according to various conditions including how many times the refrigerator door opens and closes.
• Ice making stops when the ice storage bin is full.
• If you don't want to use automatic ice-maker, change the ice-maker switch to ON-OFF.
If you want to use automatic ice-maker again, change the switch to OFF-ON.
NOTE : It is normal that a noise is produced when ice made is dropped into the ice storage bin.
DISPENSER
DISPENSER
Pressing
- 26 -
WATER CRUSHED CUBED
Switch