Replacing The Ultrabay Device - Lenovo ThinkPad T440p User Manual

9. Connect the antenna cables to the new wireless WAN card. Ensure that you connect the red cable to
the main connector on the card, and the blue cable to the auxiliary connector on the card.
10. Install the base cover assembly
11. Install the battery pack. See "Replacing the battery pack" on page 63.
12. Turn over the computer and connect the ac power adapter and all cables.

Replacing the Ultrabay device

Before you start, print these instructions.
To replace the Ultrabay device, do the following:
1. Turn off the computer, then disconnect the ac power adapter and all cables from the computer.
2. Remove the battery pack. See "Replacing the battery pack" on page 63.
3. Loosen the screws
shown by the arrow
1 and tighten the screws
1 that secure the base cover assembly. Then remove the base cover assembly as
2 .
2 .
.
Chapter 6
79
Replacing devices