Dell OptiPlex 3020 Owner's Manual page 37

Option
Advanced Boot Options
Date/Time
Table 3. System Configuration
Option
Integrated NIC
Serial Port
SATA Operation
Drives
SMART Reporting
Description
Allows you to configure the integrated network controller. The
options are:
• Disabled
• Enable UEFI Network Stack
• Enabled
• Enabled w/PXE (Default)
• Enabled w/Cloud Desktop
Identifies and defines the serial port settings. You can set the
serial port to:
• Disabled(Default)
• COM1
• COM2
• COM3
• COM4
NOTE: The operating system may allocate resources even if
the setting is disabled.
Allows you to configure the internal SATA hard-drive
controller. The options are:
• Disabled
• ATA
• AHCI (Default)
Allows you to enable or disable the various drives on-board:
• SATA-0
• SATA-1
• SATA-2
Default Setting: All drives are enabled.
This field controls if the hard drive errors for the integrated
drives are reported during system startup. This technology is
Description
– UEFI
Allows you to Enable Legacy Option
ROMs
• Enabled (Default)
Allows you to set the date and time. The
changes to the system date and time
takes effect immediately.
37