Installing The System Board - Dell OptiPlex 3020 Owner's Manual
Small form factor
Hide thumbs
Also See for OptiPlex 3020:
- Quick start manual ,
- Technical manualbook (52 pages) ,
- Owner's manual (50 pages)
Table of Contents
Advertisement
Installing the System Board
1.
Align the system board to the port connectors on the rear of the chassis and place the system
board in the chassis.
2.
Tighten the screws securing the system board to the chassis.
3.
Connect the cables to the system board.
4.
Install the:
a) power supply
b) expansion card(s)
c) heat sink assembly
d) memory
e) drive cage
f) optical drive
g) front bezel
h) cover
5.
Follow the procedures in
34
After Working Inside Your Computer .
Hide quick links:
Advertisement
Table of Contents
