Update Notification; Upgrade Notification; Setting The Others [Other]; Auto Standby - Denon DNP-720AE Owner's Manual

Update Notification
Displays a notification message on this unit's menu screen when the
latest firmware is released with "Firmware Update".
Connect to broadband Internet (vpage 6) when using this
function.
1
[MENU]
Press .
Turns on the Menu settings mode and the Menu appears on
the display (vpage 22 "Menu map").
2
ui
Use to select "Network" – "Other Network" –
p
< 1 / 3 ENTER>
or .
"Update Notification" menu appears.
3
ui
[ENTER]
Use to "On", then press
p
< 1 / 3 ENTER>
or .
On
Display update message.
Off
Do not display update message.
[ENTER] <1/3 ENTER>
When you press or
notification message, the "Check for Update" is displayed. (Refer to
page 30 for more information on "Firmware Update".)
o
Press to erase the notification message.
Upgrade Notification
Display a notification message on this unit's menu screen when
downloadable firmware is released with "Add New Feature".
Connect to broadband Internet (vpage 6) when using this
function.
1
[MENU]
Press
Turns on the Menu settings mode and the Menu appears on
the display (vpage 22 "Menu map").
2
ui
Use to select "Network" – "Other Network" –
[ENTER]
,
< 1 / 3 ENTER>
"Upgrade Notification" menu appears.
3
ui
, Use to "On", then press
< 1 / 3 ENTER>
Display upgrade message.
On
Off Do not display upgrade message.
When you press
during display of the
notification message, the "Add New Feature" is displayed. (Refer to
page 30 for more information on "Add New Feature".)
o
Press to erase the notification message.
Setting the network [Network]
.
[ENTER]
,
p
or .
[ENTER]
,
p
or .
[ENTER] <1/3 ENTER>
or during display of the

Setting the others [Other]

Auto Standby

With the Auto Standby ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with
no operation.
The default setting is "Off".
1
[MENU]
Press .
Turns on the Menu settings mode and the Menu appears on
the display (vpage 22 "Menu map").
2
ui
Use to select "Other" – "Auto Standby", then
[ENTER] < 1 / 3 ENTER>
press , or
"Select Auto Standby" menu appears.
3
ui
Use to select "On", then press
p
1 3
< / ENTER>
or .
The setting is entered.
NOTE
In the following situations, the Auto standby function does not operate.
When an iPod or USB memory device is connected to the USB/iPod
port on the unit.
When the input source is "TUNER".
When the input source being played is "Internet Radio", "Music
Server", "Napster" ,"Pandora ® " or "Rhapsody".
ENGLISH
p
.
[ENTER]
,
29