Dell PowerEdge C5230 Hardware Owner's Manual page 40

Menu Fields
Internet Protocol
Connect Retry Count
Connection Establishing
Time out
ISID
Enable DHCP
Initiator IP address
Initiator Subnet Mask
Gateway
Target Name
Target IP address
Target Port
40
Using the System Setup Program
Settings
IP4*
IP6
Autoconfigure
Disabled*
Enabled
Comments
Initiator IP address is
system assigned in IP6
mode. In
Autoconfigure mode,
iSCSI driver will attempt to
connect iSCSI target via
IPv4 stack, if failed then
attempt IPv6 stack.
The minimum value is 0
and the maximum is 16. 0
means no retry.
The timeout value in
milliseconds. The
minimum value
is 100 milliseconds and the
maximum is 20 seconds.
Information only.
Display MAC Address.
Enable DHCP
Enter IP address in dotted-
decimal notation.
Enter IP address in dotted-
decimal notation.
Enter IP address in dotted-
decimal notation.
The worldwide unique
name of iSCSI Initator.
Only IQN format is
accepted.
Enter IP address in dotted-
decimal notation.
Target Port