Dell PowerEdge C5230 Hardware Owner's Manual page 128

Servers
Hide thumbs Also See for PowerEdge C5230:
Table of Contents

Advertisement

Memory Issues
If you have installed incompatible memory modules, the system may not
boot. Verify the memory you've installed has been tested with your system
board. If the installed memory is compatible, remove and reinstall the
memory modules.
Defective memory modules may cause boot errors. To isolate a specific
memory module as defective, boot the system with just one memory module
installed at a time.
Monitor Issues
Monitor configurations can cause boot failure. Run through the following
checklist to verify monitor operation:
Ensure the monitor is plugged in and turned on.
Ensure all cables are connected properly between the monitor and the
system.
Check that the brightness and contrast controls on the monitor are not too
low.
Most monitors employ indicator LEDs showing status. Refer to the monitor's
documentation to confirm operation. If the problem still persists, test or
replace the monitor on a different AC outlet or system.
Power Supply and Chassis Issues
Verify if the chassis and power supply are compatible with the processor
model.
Table 4-1. Supported Processor List on the PowerEdge C5230
Intel Xeon E3-1200v3
Product Family
Cable Issues
Ensure that all cable connections, both internal and external, are attached
correctly and securely.
128
Troubleshooting
Intel Processors
Intel Xeon E3-1280v2
Intel Xeon E3-1240v3
12-Sled SKU
Y
Y

Advertisement

Table of Contents
loading

Table of Contents