Table of Contents
Advertisement
R
EPEATER
M
If the ARS feature has been disabled, or if you need to set a repeater shift direction other
than that established by the ARS, you may set the direction of the repeater shift manually.
To do this:
1. Press the
Item 75: RPT SHIFT.
2. Rotate the DIAL knob to select the desired shift among
"–RPT," "+RPT," and "SIMPLEX."
3. Press the PTT switch to save the new setting and exit to
normal operation.
C
D
If you travel to a different region, you may need to change the default repeater shift, to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 76: RPT
SHIFT FREQ.
3. Press the
key briefly to enable selection of this Set Mode
Item.
4. Rotate the DIAL knob to select the new repeater shift mag-
nitude.
5. Press the PTT switch to save the new setting and return to
normal operation.
If you just have one "odd" split that you need to program, don't change the
default repeater shift! Enter the transmit and receive frequencies separately,
as shown on page 48.
32
O
PERATION
R
key, then press the
R
key for one second to enter the Set Mode.
S
A
key. This provides a "Short-cut" to Set Mode
S
VX-8DR/DE O
M
Advertisement
Table of Contents
