Yaesu VX-8DE Operating Manual page 101

S C
You may change the bandwidth of the Channel Counter. Available selections are ±5, ±10,
±50, and ±100 MHz (default: ±5 MHz).
Here is the procedure for setting the Channel Counter Bandwidth:
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 19: CH
COUNTER.
3. Press the
Mode Item.
4. Rotate the DIAL knob to select the desired bandwidth (see
above).
5. Press the PTT switch briefly to save the new setting and
exit to normal operation.
VX-8DR/DE O
C
HANNEL
C
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
M
C
OUNTER
S W
O
PERATION
99