Removing The Display Panel; Installing The Display Panel - Dell Latitude E5540 Owner's Manual

Notebook pc
Hide thumbs Also See for Latitude E5540:
Table of Contents

Advertisement

4.
Follow the procedures in After Working Inside Your Computer.

Removing the Display Panel

1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove:
a) battery
b) display bezel
3.
Remove the screws that secure the display panel and flip the panel over.
4.
Perform the following steps:
a) Lift the mylar tape and disconnect the low-voltage differential signaling (LVDS) cable from the
back of the display panel.
b) Remove the display panel from the display assembly.

Installing the Display Panel

1.
Place the display panel to the display assembly.
2.
Align the display panel in its original position.
3.
Connect the low-voltage differential signaling (LVDS) cable to the display panel and attach the tape.
4.
Flip the display panel over and tighten the screws to secure the display panel.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents