Replacing The Processor Fan Assembly - Dell XPS 730 Service Manual

Replacing Fans : Dell XPS 730/730X Service Manual
1 cage housing
3 screws (2)
7. To install the card slot fan assembly, connect the fan cable to the FAN_CAGE connector on the system board (see
Master Control Board).
8. Align the fan cage tabs with the slots in the chassis. Insert the tabs and push the cage towards the front of the chassis.
9. Screw in the fan retention screws on the front and back of the fan cage.
10. Replace any expansion cards that you removed (see
11. Replace the PCI card fan shroud and captive screws on top of it.
12. Replace the computer cover (see
13. Connect your computer and devices to electrical outlets, and then turn them on.

Replacing the Processor Fan Assembly

1. Remove the card slot fan shroud (see
file:///C|/Users/santhosh_v/Desktop/7/SM_en/fans.htm[9/5/2013 11:46:42 AM]
2 fan cage
Replacing a PCI/PCI Express
Replacing the Computer Cover).
Removing the Card Slot and Processor Fan
Card).
Shrouds).