SERVICING YOUR HONDA SNOWBLOWER
SPARK PLUG SERVICE
Recommended spark plug: BPR5ES (NGK)
W1 GEPR-U (DENSO)
To ensure proper engine operation, the spark plug must be properly gapped
and free of deposits. If the engine has been running, the muffler will be very
hot. Be careful not to touch the muffler.
1. Remove the spark plug cap.
2. Clean any dirt from around the
spark plug base.
3. Use the wrench supplied in the
tool kit to remove the spark plug.
4. Inspect the spark plug. Replace it
if the electrodes are worn or if the
insulator is cracked or chipped. If
it is to be reused, clean the
electrode and insulator with a wire
brush.
SPARK PLUG
RENCH
45