Honda EM3800SX Owner's Manual page 64

Battery Tray Kit (optional)
1. Install the battery guard on the frame.
Set the battery tray on the battery guard and tighten the bolts.
2. Route the starter cable under the tank and connect it to the starter
solenoid.
3. Connect the ground cable to the generator rear housing.
4. Set the battery on the battery tray and secure with the battery
bracket.
Connect the starter cable to the battery positive ( ) terminal first,
then to the negative ( ) terminal. When disconnecting, disconnect
at the battery negative ( ) terminal first.
5. Install the battery guard plate on the battery guard.
Battery posts, terminals and related accessories contain lead and lead
compounds. Wash hands after handling.
62
−
−
＋