ECS 760GX-M Manual page 44

38
Power Up by Alarm (Disabled)
When set to Enabled, the following three fields become available: Month Alarm, Day of
Month Alarm, and Time Alarm Upon arrival of the alarm time, it will instruct the system to
wake up. When set to 0 (zero) for the day of the month, the alarm will power on your
system every day at the specified time.
** Reload Global Timer Events **
These fields determine which events waken the system from power saving mode.
Primary/Secondary IDE (Disabled)
When this item is enabled, the system power will resume the system from a power
saving mode if there is any activity on primary or secondary IDE channels 0 or 1.
FDD, COM, LPT Port (Disabled)
When this item is enabled, the system will restart the power-saving timeout counters
when any activity is detected on the floppy disk drive, serial ports, or the parallel port.
PCI PIRQ[A-D]# (Disabled)
When this item is enabled, any activity from one of the listed devices wakes up the
system.
Press <Esc> to return to the Power Management Setup screen.
Cool'n'Quiet control (Auto)
This item helps the system to lower the frequency when CPU idles. When the frequency
decreases, the temperature will drop automatically as well.
FID Control (StartUp)
This item allows users to adjust the CPU frequency; the range will be varied according to
different CPUs. We strongly recommend you leave this item at its default value.
VID Control (StartUp)
This item allows users to adjust the CPU voltage. We strongly recommend you leave this
item at its default value.
Using BIOS