Advanced Bios Features - ECS 760GX-M Manual

28

Advanced BIOS Features

This option defines advanced information about your system.
Hard Disk Boot Priority
CPU Internal Cache
External Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
ATA 66/100 IDE Cable Msg.
Typematic Rate Setting
Typematic Rate (Chars/Sec0
X
Typematic Delay (Msec)
X
Security Option
APIC Mode
OS Select For DRAM>64MB
Hard Disk Boot Priority (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
1. Pri.Master:
2. Pri.Slave:
3. Sec. Master:
4. Sec. Slave:
5. USBHDD0:
6. USBHDD1:
7. USBHDD2:
8. Bootable Add-in Cards
CPU Internal Cache (Enabled)
All processors that can be installed in this motherboard use internal level 1 (L1) cache
memory to improve performance. Leave this item at the default value for better perfor-
mance.
External Cache (Enabled)
Most processors that can be installed in this system use external level 2 (L2) cache memory
to improve performance. Leave this item at the default value for better performance.
Quick Power On Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Phoenix-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults
Phoenix-AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
: Move PU/PD+/-/:Change Priority F10:Save ESC:Exit
Using BIOS
[Press Enter]
Item Help
[Enabled]
[Enabled]
Menu Level
[Enabled]
Select Hard Disk
[Floppy]
Boot Device Pri-
[Hard Disk]
ority
[CDROM]
[Enabled]
[Disabled]
[Disabled]
[On]
[Fast]
[Enabled]
[Disabled]
6
250
1 2 3
[Setup] 1 2 3
1 2 3
[Enabled]
[Non-OS2]
F7:Optimized Defaults
Item Help
Menu Level
Use < > or < >
to select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.