Fujitsu PRIMERGY TX200 S2 Options Manual page 72
Server system
Hide thumbs
Also See for PRIMERGY TX200 S2:
- Start manual (9 pages) ,
- System configuration and order-information manual (17 pages) ,
- User manual (317 pages)
Table of Contents
Advertisement
Installing the external SCSI interface
Figure 58: Fastening the plug connector at the rear of the housing
Ê Remove the two threaded bolts from the plug connector.
Ê Feed the plug connector through the notch at the rear of the housing.
Ê Fasten the plug connector to the rear of the housing using the threaded bolts
removed beforehand (see arrow).
Ê Reinstall the processor fan holder (see
Ê Reinstall the ventilation duct over the system fans (see
Ê Close the server, connect it to the power outlet, and switch it on as described
in the
chapter "Completion" on page
72
page
38).
97ff.
Options Guide
External SCSI interface
page
39).
U41593-J-Z156-2-76
Advertisement
Table of Contents
