9
RemoteView components
V
CAUTION!
Observe the safety instructions in the
page
13ff.
9.1
Installing the chipDISK
V
CAUTION!
If the chipDISK has been installed it is not possible to use the ATA port.
Ê Open the server as described in the
Figure 53: Installing the chipDISK
Ê Connect the chipDISK to the plug-in location on the system board.
V
CAUTION!
Note the coding of the chipDISK and plug-in location.
U41593-J-Z156-2-76
chapter "Safety notes" on
chapter "Preparation" on page
Options Guide
19ff.
67