Solving Setup Problems; Noise After Ink Installation - Epson Artisan 1430 User Manual

Hide thumbs Also See for Artisan 1430:

Table of Contents

print settings. Check the other solutions in this section or try uninstalling and reinstalling your

printer software.

• If the page prints but the nozzle check pattern has gaps, clean or align the print head.

• If the page does not print, the printer may have a problem. Check the other solutions in this

manual. If they do not work, contact Epson.

Parent topic:

Related concepts

When to Uninstall Your Product Software

Print Head Cleaning

Print Head Alignment

Related references

Where to Get Help

Solving Setup Problems

Check these sections if you have problems while setting up your product.

Software Installation Problems

Parent topic:

Noise After Ink Installation

If you hear noises from your product after installing ink, check these explanations:

• The first time you install ink cartridges, the product must prime its print head. Wait until priming

finishes before you turn off the product, or it may prime improperly and use excess ink the next time

you turn it on. Your product is finished priming the print head when the

• If the product's print head stops moving or making noise, and the charging process has not finished

after approximately 5 minutes, turn off your product. Turn it back on and check to see if charging is still

in progress. If it is still in progress, contact Epson for help.

Parent topic:

Table of Contents