Epson Artisan 1430 User Manual page 112

Light status Condition/solution
The paper/cancel Paper has jammed in the printer or the output tray is closed. Remove any
light is flashing jammed paper and make sure the output tray is open, then press the
If printing on a CD or DVD, the CD/DVD tray did not eject correctly. Pull out
the CD/DVD tray and press the
The ink light is on An ink cartridge is not installed, installed incorrectly, expended, or cannot be
used with the printer. Make sure all ink cartridges are installed correctly and
replace any expended or incompatible ink cartridges.
The ink light is flashing An ink cartridge is low. Make sure you have a replacement cartridge.
The print head is obstructed by jammed paper or another foreign object and
The power light is off,
cannot return to the home position. Turn the printer off. Open the printer
and the
cover and remove any paper or other obstructions from the paper path. Then
paper/cancel and
turn the printer back on. If the error does not clear, contact Epson.
ink lights are flashing
fast
The paper/cancel The printer's ink pads are nearing or at the end of their service life. Contact
and ink lights are Epson to replace the ink pads. If the ink pads are nearing the end of their
flashing alternately service life, printing can be resumed by pressing the
button.
The paper/cancel The firmware update has failed, and the printer is in recovery mode. Visit
and ink lights are on Epson's support website at
www.epson.ca/support
update.
Parent topic: Solving Problems
Related concepts
Check Cartridge Status
Related references
Paper Jam Problems
Where to Get Help
Related topics
Replacing Ink Cartridges
Loading Paper
paper/cancel to resume printing.
www.epson.com/support
(Canada) for instructions on repeating the firmware
112
paper/cancel button.
paper/cancel
(U.S.) or