Master Mode/All On - Nuvo Simplese System Installation Manual

Master Mode/All On

The Simplese System has an All On feature. Any keypad
within the system, which can be up to eight zones, has the
ability to become a master control for the entire house. The
master keypad will control zone on, volume level, and source
selection for all other zones.
To place a keypad in Master Mode function, simply press the
Mute and Source 4 buttons simultaneously. This will cause
the volume indicator LED for that zone's keypad to flash
continuously. All other zones will then turn on to the same
relative volume level and increase or decrease with the
volume adjustment on the master keypad.
Any of the other zone keypads have the ability to override
the master function by selecting a new source, changing a
local zone's volume control, or by turning a local zone's
keypad off and back on.
The master mode is turned off by repeating the sequence of
pressing the Mute and Source 4 buttons.
VOLUME
MUTE
TNR1 CD
TNR2 HD
11
The lit volume LED will
flash when the keypad
is in Master Mode.
Press the Mute and
Source 4 buttons to
initiate the Master
Mode.