Installation; Mounting Guidelines; Windshield Mounting - Whistler Total Band Protection XTR-690SE Owner's Manual

Total band protection laser-radar detector
Hide thumbs Also See for Total Band Protection XTR-690SE:
Table of Contents

Advertisement

Windshield
Mounting
INSTALLATION
Mounting Guidelines
• Mount tne unit as low as possible near the
center of the windshield.
• Do not mount the unit behind wipers,
ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can
affect radar and laser signals and reduce
critical warning time. (Regular tinted glass
does not affect reception).
• Some windshields have an Instaclear'" or
Electriciear™ type coating, which affect radar
signals. Consult your dealer or the owner's
manual supplied with your vehicle to determine
if your windshield has this coating.
• Avoid placing the unit in direct contact with
the windshield.
• To reduce the possibility of theft, conceal
the unit when not in use.
b~
l.tji'~~
IMPORTANT:
Make sure the unit is level
Windshield Mounting
• Install the two suction cups and rubber bumper
onto the bracket by fitti ng them into their holes.
• Press the suction cups onto the windshield at the
location you have chosen.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Total band protection xtr-695se

Table of Contents