Table of Contents
Advertisement
INSTALLATION OF LASER/RADAR ANTENNA
General Information
The laser/radar antenna is waterproof and designed to be
mounted at the front of your vehicle. Optimum mounting
location is near the license plate area. Since this module also
includes a Laser receiver, the front of this module needs to
"look" down the road with no obstructions. Radar signals will
pass through non-metallic materials such as fiberglass and
plastic, however, because of the laser receiver, there can be
no material blocking the receiver's antenna window. If
obstruction cannot be avoided, consider the vertical mounting
option. Because the optimal location for mounting the antenna
varies by vehicle type, the hardware supplied is designed to
offer a wide variety of mounting options. We suggest choosing
the option that enables the antenna to be securely fastened and
provides the antenna window adequate forward visibility.
NOTE: The "antenna window" is the bubble area on the case
All references to antenna in this manual will be the bubble
area.
NOTE: Use of hardware that is not supplied or DRILLING
into the case will cause damage to the receiver and void the
warranty.
TIP: Use removable thread lock on the hardware to prevent any
bolts from backing out due to vibrations.
Antenna Mounting Brackets
There are two types of mounting brackets for the antenna:
Large L (1) and Small L (2). The Large L bracket fastens to 2 – 4
holes on the cover of the antenna. The Large L Bracket may be
fastened to the antenna in a variety of positions.
Do not drill into the receiver housing!
8
Advertisement
Table of Contents
