Advertisement
C
ONNECTING
Hooking up the Audio/Video Sender
1. Connect one set of audio/video cables to the AUDIO and VIDEO jacks
of your Audio/Video Sender. Take care to match the colors of the plugs
on the cable with the jacks on the Audio/Video Sender.
2. Connect the other end of the cable to the audio/video OUT jacks on
your TV. Take care to match the colors of the plugs on the cable with
the jacks on the TV. If the jacks on the TV are colored differently,
connect the yellow plug to the jack labelled VIDEO, the red plug to
the jack labelled AUDIO RIGHT and the white plug to the jack labeled
AUDIO LEFT. See diagram A below.
Note: If your TV does not include Audio/Video OUT jacks, you will
need to remake the connections as shown in diagram B) using the TV
antenna (coaxial) connections to link up a Satellite Receiver (DBS), or
Cable Box, or VCR, or DVD Player to your TV.
A/V Cables
TV
Out
Video Audio
In
A/V Component
Out
To TV
Antenna
Video Audio
Antenna
A) Connections for a TV
with A/V OUT jacks.
U
P
Coaxial
Cable
TV
UHF/VHF
A/V Component
Out
UHF/VHF
Antenna
Video Audio
To TV
B) Connections for a TV
without A/V OUT jacks.
6
3. Plug the Audio/Video Sender's Power Supply into a convenient 120
volt wall outlet and plug its jack into the Audio/Video Sender.
4. Position the Audio/Video Sender in a convenient location such as on
top of your TV and orient the antenna so that the fl at side points in the
direction of the room where you will be installing the Receiver.
If you have several A/V
components:
If you have two or more A/V
components (e.g. Satellite Receiver
(DBS), VCR, Cable Box, DVD Player,
etc.) that you want to watch in another
room, they will probably already be
hooked up to the local TV in series (see
the diagram to the right). To connect the
Audio/Video Sender you just need to
identify the last component in the chain
and connect its LINE OUT jacks to the
Audio/Video Sender's A/V IN jacks.
If the last component in the chain
does not have spare LINE OUT jacks,
reconnect the local TV to the last
component in the chain using a coaxial
cable to connect to the VHF/UHF jack,
then use the A/V connections for the
Audio/Video Sender.
To TV
Antenna
TV
UHF/VHF
Satellite Receiver
Out
Video Audio
UHF/VHF
To TV
In
Cable Box
Out
Video Audio
In
Out
DVD Player
Video Audio
In
7
Advertisement
