NTRODUCTION ONTENTS Your Wireless Audio/Video Sender system consists of a Sender unit ............... 3 NTRODUCTION which you connect to your satellite receiver, DVD player, etc, and a ..........4 Receiver unit that you connect to a TV anywhere in your home. The ONTROLS AND ONNECTIONS Audio/Video Sender converts the A/V signal from your A/V product...
ONTROLS AND ONNECTIONS Audio/Video Sender Audio/Video Receiver RF Antenna RF Antenna (for use with the IR (for use with the IR Extender feature) Extender feature) 900 MHz Antenna IR Extender Jack A/V In Jacks A/V Out Jacks Power Supply Power Supply Jack Jack ON-OFF...
ONNECTING Hooking up the Audio/Video Sender 3. Plug the Audio/Video Sender’s Power Supply into a convenient 120 volt wall outlet and plug its jack into the Audio/Video Sender. 1. Connect one set of audio/video cables to the AUDIO and VIDEO jacks 4.
X10 Video Sender and some other equipment that uses 900 MHz, check the other device’s owner’s manual for the frequencies of each channel that it uses. The X10 Video Sender uses 921MHz. We recommend A/V Component using a frequency on the other device that is farthest from 921MHz. Otherwise Video Audio you will need to discontinue use of the device while using the Video Sender.
1. Plug the IR extender jack on the IR emitter cord into the IR EXT. from the original date of purchase at retail. X10 agrees to repair or replace, at its sole socket located on the back of the VT50A Transmitter.
Page 7
X10.com, a division of X10 Wireless Technology, Inc. 400 Forge Way, Rockaway, NJ 07866 VK83A - 5/11...