What To Do If; Remedying Small Malfunctions - AEG Lavamat 66600 User Information

What to do if...

Remedying small malfunctions

If during use of the appliance one of the following error codes is shown
in the multi-display:
– E10 (Problems with water inflow),
– E20 (Problems with water outflow),
– E40 (door open),
please have a look at the following table.
When the fault is remedied, press the
In the event of other errors (E and a number or letter): Switch the ap-
pliance off and then on again. Re-set the programme. Press the
button (START/PAUSE).
If the error appears again, please contact the Customer Care Depart-
ment, stating the error code.
Problem
Washing machine is not
working.
The door cannot be
closed.
When a button is
pressed, Err appears in
the multi-display.
E40 appears.
indicator (END)
flashes 4x, at the same
time an acoustic signal
sounds 4x.
E10 appears.
indicator (END)
flashes 1x, at the same
time an acoustic signal
sounds 1x.
(Problems with water
inflow)
18
Possible cause
Mains plug not plugged in
or fuse not working.
Door not closed properly.
The button (START/
PAUSE) button was not
pressed for long enough.
Child safety device engaged.
The selected function can-
not be combined with the
programme set.
The door is not closed prop-
erly.
Tap turned off.
The filter in the threaded in-
let hose fitting is blocked.
Water tap is furred with
lime scale or is faulty.
button (START/PAUSE).
Remedy
Connect the plug to a mains
socket. Check fuse.
Close door - there should be
an audible click.
Press the button
(START/PAUSE).
Release the child safety de-
vice.
Select another function.
Close the door properly. Re-
start the programme.
Turn on the tap.
Turn off the tap. Unscrew the
hose, take out the filter and
clean it.
Check the tap and have it re-
paired, if necessary.