To Clean The Drum; Clean Operating Screen And Housing; What To Do If - AEG LAVATHERM 59870 User Manual

7. As necessary, approx. once every 6
months, remove the fluff from the heat
exchanger using the sponge supplied.
When doing this, please use rubber gloves.
Tip: The fluff can be removed more easily if
it is first dampened (e. g. with a laundry
dampener) or with the help of vacuum clean-
er.

To clean the drum

CAUTION!
Do not use abrasive materials to clean the drum. Use a soft detergent to clean the inner
side of the drum and the drum blades.
Keep the inner surface of the drum and the drum blades clean. The minerals from the
water or cleaning agents can collect on the inner surface of the drum. This cause that
the laundry is not sufficient dry.

Clean operating screen and housing

CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the appliance.
Use a damp cloth to wipe down the operating screen and housing.

WHAT TO DO IF ...

Troubleshooting by yourself
1)
Problem
Dryer does
not work.
Unsatisfacto-
ry drying re-
sults.
Loading door
does not close
Possible cause
Dryer not connected to mains supply.
Loading door opened.
The START PAUSE button not pressed.
Incorrect programme set.
Fluff filters clogged.
Heat exchanger clogged.
Max. loading exceeded.
Covered ventilation grill.
Residue inside the drum.
High water hardness.
Filters not locked in place.
What to do if ...
Remedy
Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Close loading door
Press the START PAUSE button.
Set suitable programme.
3)
Clean fluff filters.
3)
Clean heat exchanger.
Respect max. loading volume.
Uncover ventilation grill in base area.
Clean the drum inside.
Set suitable water hardness
Install fine filter and/or snap course fil-
ter into place.
99
2)
4)
.