What To Do If; Remedying Small Malfunctions - AEG Lavamat 52810 User Information

Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the
folds of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small malfunctions

If the programme progress display indicates one of the following fault
codes during operation:
– END flashes 1x (problem with water intake),
– END flashes 2x (problem with water drainage),
– END flashes 4x (door open),
please look at the following table.
When the fault is remedied, press the START/PAUSE button.
If there are other fault codes (one or more flashing lights on the pro-
gramme progress display):
Switch the appliance off and on again. Re-set the programme. Press the
START/PAUSE button.
If the fault is displayed again, please contact the Customer Care De-
partment.
Problem
Washing machine does
not work.
Door cannot be closed.
END display flashes 4x.
18
Possible cause
Mains plug not plugged in
or fuse not working.
Door not closed properly.
START/PAUSE button was
not pressed for long
enough.
Child safety device engaged. Release child safety device.
Door is not closed properly.
Remedy
Plug in mains plug. Check
fuse.
Close door – there should be
an audible click.
Press START/PAUSE button
for longer.
Close door properly. Start
programme again.