Gateway NV51B User Manual page 100

agency approval marking. The cord must be suitable for use in the end-user country.
Consult your dealer or the local electrical authorities if you are unsure of the type of
power cord to use in your country.
Cables
For cables which are not delivered with the Product in the computer's packaging:
The EMC performance of the system is guaranteed only if the cable and interface use
efficient shielding.
The use of shielded interface cable is required for USB, IEEE1394, serial, printer,
game, analog or digital audio/ video, PS2, TV or FM antennas, and generally all high-
speed cable interfaces.
Use only UL Listed No. 26AWG or larger telecommunication cords.
Only Ethernet LAN or RTC modem cable can have length exceeding 3 metres.
Gateway recommends that you add a ferrite core round clip to each cable connecting
your computer to a hardware device that was not included with your computer.
− Ferrite reference: 28A-2029 from Steward (two loops)
During product certification, Gateway used the following cable quality:
− USB2.0 Certified Cables from Hama 46778
− IEEE1394 shielded FireWire from Hama 50011
− RCA-RCA shielded Audio/Video Cables from Thomson KHC001M, KHC012M,
KHC028M
− Stereo Jack shielded Audio cables from Hama 43330H, 42714H
C
HASSIS COVER REMOVAL AND REPLACEMENT
Before removing the chassis cover to service or modify the equipment, you must
disconnect all power and modem cords.
Caution: Some components inside the computer can become hot after
prolonged use.
You then must close the chassis before you plug in and switch on the equipment.
100