Combi Microwave + Grill Function - DeLonghi MW 603 Instructions For Use Manual

COMBI MICROWAVE + GRILL FUNCTION

This function can be used to:
• Cook all types of roast meat, poultry, kebabs and potatoes rapidly . . . . . . . .page 47
• Brown dishes (eg. lasagne, au gratin vegetables, macaroni cheese). . . . . . . .page 47
PROGRAMMING THE COMBI MICROWAVE + GRILL FUNCTION
• You can display the time at any moment, even when the oven is operating, by pressing
The time will be displayed for about three seconds.
• You can open the door to check on cooking at any time.
If you open the door during cooking, the microwave unit switches off. To resume cooking, close
the door and press
• If cooking must be stopped for any reason, this can be done without opening the door by pressing
the STOP/CANCEL button (9).
• To finish cooking, proceed as follows:
- if the door is open, press the STOP/CANCEL button (9) once;
- if the oven is operating, press the STOP/CANCEL button (9) twice;
- if the oven is off and the door is closed, press the STOP/CANCEL button (9) once.
• The cooking time and microwave power level can be modified even after the required function
has been started by pressing the START button (14).
NOTA: this model is fitted with an automatic cooling cycle triggered when the oven is excessively at the end of
a cooking cycle in "combi microwave + grill" or "grill" function. When you close the door after removing the
food, "C C o o o o l l " appears on the display until the cooling cycle is completed.
46
1. Press the
(0 0 . . 0 0 0 0 flashes on the display and the
indicator at the top corresponding
to the combi microwave + grill
function and the third indicator at
the bottom (microwave power level)
come on).
2. Select the time required by
rotating the
knob (8).
(The display flashes).
3. Press the
the required power level is
selected (5 = maximum; 1 =
minimum). If the button is not
pressed, the oven functions at
power 3). (On the display, the
indicator at the bottom indica-
tes the power selected).
4. Press the START button (14).
(The time and power level set
are displayed).
5. The end of the time set is
indicated by three long beeps
and "E E n n d d " appears on the
display.
START (14).
button (10).
TIME ADJUST
button (4) until
(2).