Advertisement
INSTRUCTIONS
Before using the appliance, extract the power cable completely and plug into the mains. To rewind
the cable, unplug and press the cable wind pedal
(G) (fig. 10) .
Turning on:
To turn the appliance on and off, press the ON/OFF
pedal (F) (fig. 11). The slide (I) regula-
tes suction power.
In these versions, the hose handgrip incorporates a mechanical suction regulator. Suction can be
adjusted rapidly and practically by simply moving the slide (fig. 12).
CLEANING
Dust bag full indicator
When the indicator (L) changes colour (fig. 13), the bag needs replacing or there is an obstruc-
tion.
Replacing the bag
To replace the bag, press the dust collection container release button (Q) and raise the cover (fig.
15).
Extract the bag (fig. 16).
Throw the old bag away in the rubbish.
Insert the new paper bag.
To insert the replacement bag correctly, make sure the sides of the rigid bag support match
the grooves.
You are recommended to replace the bag frequently when vacuuming up very fine dust such as flour, talcum pow-
der and similar.
The cover cannot be closed unless a bag is present.
Motor protection filter
To ensure the appliance has a long working life and to protect the motor, the motor protection fil-
ter must be kept clean.
To access the filter, open the dust collection container, extract the dust bag and remove the filter
holder (fig. 17). If the filter is not excessively dirty, simply remove the dust.
In the case of persistent
dirt, replace.
Rear filters.
Open the rear grid (N) and extract the filter.
Clean with a brush then replace, positioning the grid correctly (fig. 18).
In the case of persistent dirt, replace.
Important:
Never use the appliance without the filter.
11
Advertisement
