Setup Of Additional Computers - Cisco NMH Quick Installation Manual

Media Hub
orE:
You can register the Media Hub later at
www.linksysbycisco.com/registration
A.
Insert the Setup Wizard CD-ROM
into your computer's CD-ROM
drive. The Setup Wizard should
run automatically, and the video
should begin automatically. If it
does not, click
Start
and then
Run.
In the field provided, enter
D:\setup.exe
(if"D" is the letter of
your CD-ROM drive).
To bypass the video, click the X button in the upper right corner of the
screen.
s.
The Media Hub has been
configured.
Its Media Browser will launch
automatically. If you do not want
to access the Media Browser,
deselect
Access the Media
Browser now.
Congratulations! Installation of the Media Hub is complete.
Setup of Additional Computers
To exit the Setup Wizard, click
Finish.
The Media Browser requires Adobe Flash Player (version 9 or higher). If it is not
installed on your computer, then you will be prompted to download and install
it. Follow the on-screen instructions. (An active Internet connection is required.)
To set up additional computers for access to the Media Hub, run the Setup
Wizard and then click
Connect Computers.