Power Off; Alerts - Cisco NMH Quick Installation Manual

Chapter 5
Firmware Select this option to view the version numbers
of the current and latest firmware. You can also upgrade
the firmware of the Media Hub.
Firmware
Current version The version number of the current
firmware is displayed.
Latest version The version number of the latest
available firmware is displayed.
Update Click Update to upgrade the firmware to the
latest version available.
WARNING: Do not reboot or power off the
Media Hub during the firmware upgrade.
Press the left arrow to return to the Settings menu.
Power Off
The Power Off screen allows you to power off the Media
Hub from the front panel.
Power Off
Click Yes to confirm the power-off, or click No to cancel.

Alerts

The LCD menu also displays informative alert messages.
This section describes the possible messages.
New Device Alert
A new device is connected to the Media Hub. Click OK.
Media Hub
Use of the LCD Menu
New Device Alert
On the Alert screen, click Yes to copy media files of the
new device to the Media Hub, or click No to cancel.
Import Device Content
If you clicked Yes, then the Media Hub will copy media files
of the new device to the Media Hub.
Importing
Data Import Done
After the media files have been copied, click OK.
Import data is saved to the media/import folder, which
organizes the data by the date of the data import. Refer to
Backup Folder, page 15.
NOTE: To back up all files of the new device,
refer to Backup, page 37. (The Import option
only copies media files.)
40