Honda 2010 Accord Coupe Owner's Manual page 89

Door Locks
To program the Ignition Switch
Unlock mode:
Unlocks the driver's door or both doors
when the ignition switch is moved out of
the ON (II) position.
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
86
3. push and hold the
On A/T vehicles,
brake pedal, then move the shift
lever out of the Park (P) position.
4. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold the switch:
Until you hear another click
(after about 5 seconds) to
activate driver's door unlock
feature.
Or, until you hear two more
clicks (after about 10 seconds)
to activate both doors unlock
feature .
2010 Accord Coupe
5. Release the switch, and within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
move the shift
On A/T vehicles,
lever to the Park (P) position.
6. Turn the ignition switch to the
LOCK (0) position.
Even if your vehicle's battery is
removed or goes dead, the system
keeps the auto door lock/unlock
setting which you selected.