Honda 2010 Accord Coupe Owner's Manual page 86

3. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
4. Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.
To program the Drive Lock mode:
Locks both doors when the vehicle's
speed reaches about 9 mph (15 km/h).
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. push and hold the
On A/T vehicles,
brake pedal, and move the shift
lever out of the Park (P) position.
2010 Accord Coupe
Door Locks
4. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5. Release the switch, and within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
move the shift
On A/T vehicles,
lever to the Park (P) position.
6. Turn the ignition switch to the
LOCK (0) position.
83