AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. 8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, damaged or otherwise stressed.
Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives are only covered for the first 10,000 hours, or 1 year (whichever comes first). Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors before the extended warranty expires.
Designed to be used in conjunction with Datavideo Mobile Video Studios, like the MS-900, and the CB-22 / CB-23 all in one cable. The PD-3 supplies a steady user chosen voltage for your non-Datavideo production kit whilst on location or in your studio.
The following information is provided to allow competent engineers to create their own bespoke XLR DC power cable connections. See above picture also. For further advice and guidance please contact your dealer or local Datavideo office. Pin 1 = GND ( - )
Protection type: Recovery automatically after fault condition is removed AC Overload non-recovery fuse on the AC input outlet Powers the PD-3 On / Off On/Off Switch Light switch indicator AC Inlet for connecting to suitable mains power outlet – 100-240VAC. The AC In outlet socket contains a fuse holder fitted with a 6A /250V fuse.
It is our goal to make your products ownership a satisfying experience. Our support staff are available to assist you in setting up and operating your system. Please refer to our web site www.datavideo- tek.com for answers to common questions, support requests or contact your local office below.