Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Datavideo PD-4A
Summary of Contents for Datavideo PD-4A
- Page 1 REDUNDANT POWER CENTER PD-4A Instruction manual...
- Page 2 SERVICE & SUPPORT ............................12 Disclaimer of Product & Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete.
-
Page 3: Fcc Compliance Statement
AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. 8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. -
Page 4: Warranty
The product warranty period begins on the purchase date. If the purchase date is unknown, • the product warranty period begins on the thirtieth day after shipment from a Datavideo office. All non-Datavideo manufactured products (product without Datavideo logo) have only one •... -
Page 5: Disposal
Disposal For EU Customers only - WEEE Marking This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. -
Page 6: Introduction
The PD-4A redundant power supply unit protects your power system against unforeseen events by supplying power to devices the instant they begin to fail. The PD-4A is an essential accessory for Datavideo Mobile Studio applications, together with the Video switcher, LCD, recorders and etc, the PD-4A makes the integration of a Mobile Studio easier and more professional. -
Page 7: Front Panel
• Green: Good AC Input and DC output power • Blinking Red: AC Input failed (When input falls below 80±5VAC) Cooling Fan The PD-4A has two built-in cooling fans; please ensure that the two fans are not blocked and the airflow is available. ℃. - Page 8 DC the PD-4A will not regulate the power outlets. Please ensure that the 12V power source that you use is regulated. If you intend to run the PD-4A from a car or van power outlet make sure that a suitable regulator is used on the power feed.
-
Page 9: Rear Panel
DC Out 12V 10A 2 x MAX 12V 10A DC Output via XLR In-Line Socket Cooling Fan The PD-4A has two built-in cooling fans; please ensure that the two fans are not blocked and the airflow is available. ℃. Note: Fan starts when internal ambient temperature... -
Page 10: Datavideo Product Voltage Requirements
Datavideo Product Voltage Requirements This table is a guideline for Datavideo products; if you are using products from other manufacturers, please check their voltage requirements carefully before connecting to the PD- DC 12V 3A BAC-03, VP-332, DAC-15, DAC-10, DAC-6, DAC-5, TLM-70D, TLM-404,... -
Page 11: Dimensions
Dimensions All measurements in millimeters (mm) -
Page 12: Service & Support
Service & Support It is our goal to make owning and using Datavideo products a satisfying experience. Our support staff is available to assist you to set up and operate your system. Contact your local office for specific support requests. Plus, DATAVIDEO WORLDWIDE OFFICES please visit www.datavideo.com to access our FAQ section.