Size Switching; Input Signal Screen Display - Hitachi 37PD5000 User Manual

Size Switching

Each time the SIZE button of the remote control or the monitor is pressed, the screen display area will change in
sequence and the status will be displayed at the bottom of the screen.
Normal Full Zoom1
*
Real Zoom3 Zoom2
Display area selection diagram (RGB input)
Display
Resolution
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024 (SXGA)
1600 X 1200 (UXGA)
55" only selected
1366 X 768 (WXGA) character WXGA
Type.
Real mode position
Display
Resolution
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 768 (WXGA)
can't select
1280 X 1024 (SXGA)
1600 X 1200 (UXGA)

Input Signal Screen Display

The input signal status can be displayed on the screen by pressing the RECALL button of the remote control or the monitor.
The display will go out in approximately 6 seconds.
RGB
Off-timer
On-timer
RECALL button
SIZE button
* This mode is only available for VGA (640 X 480) and WVGA (864 X 480).···37" , 55" Model
This mode is only available for SVGA (800 X 600) , XGA (1024 X 768) and WXGA (1280 X
768)···55" Model only
Full Normal
37" Model 55" Model
can't select
-- -- Min.
OFF
-- -- : -- --
RGB 1 RGB 2
AV1 AV2
AUTO PinP
MENU
OK
SIZE button
ID
Zoom1 Zoom2
can't select
Input mode
RGB2
RGB
Signal mode
H : 48.4kHz
Input horizontal frequency
V : 60.1 Hz
Input vertical frequency
MUTE VOL
AV3 AV4
SIZE RECALL
RECALL button
ID SET
Zoom3