3.
Apply appropriate sealant around the opening to prevent moisture from entering the housing.
Figure 2
Connecting Cables Through the Side Conduit
1.
Peel back the bottom flat gasket below the side conduit just enough to expose the security
screw.
2.
Use the supplied Allen key to loosen and remove the security screw (see
3.
Use a flat screwdriver to unscrew the conduit plug.
4.
Pull the cables through the hole.
5.
Apply appropriate sealant around the opening to prevent moisture from entering the housing.
Document 800-01529 Rev A
02/08
Base Gasket Opening
Base gasket opening
Figure 3
below).
11