Table of Contents
Advertisement
ON-SCREEN DISPLAY MENU TIMER MENU
Timer menu
The Timer for the set uses a countdown timer system. It can be set by On Timer, Off Timer and Auto Off.
1
Press MENU button to display menu.
Press the
cursor buttons to select Timer option
as shown on right.
2
Press ENTER button to display Timer menu.
The adjustment items are shown below.
Off Timer
Example: To turn off after 1 hour and 25 minutes.
Press the
Press number button on the remote control unit to enter the
specified amount of time (the maximum time is 23:59)
input the hour, then input minute, i.e.01:25(shown on right).
After 1 hour and 25 minutes, the TV will go into
standby mode. Timer starts countdown after quitting the
Timer menu.
Note: For the sake of safety, after setting Off Timer, if the power is turned off (or power supply is turn off
accidentally) before the set time elapses, the TV will be in standby mode when you restart the TV.
On Timer
The setting of On Timer is similar to that of Off Timer. After On Timer is set, please turn off the TV by
pressing
button on the remote control unit until to allow the TV entering countdown mode. The power
indicator on the front of the TV blinks two minutes later, it is entering the circle mode of quick
blinking dark quick blinking. This is normal. The power is turned on automatically when the set time has
elapsed.
Notes: (1) If turning off the set by using Power on/off switch, the On Timer will not work.
(2) If the power is turned off by using Power on/off switch before the set time is approaching or the power
supply is turned off accidently. The TV will be in standby mode when you restart the TV.
(3) For the sake of safety, if there is no operation for 2 hours after the power is turned on by the On Timer
function, the power then turn off automatically and the TV will be in standby mode.
Auto Off
If Auto Off set to On, the TV will go into standby mode automatically in 60 minutes when there is no more
broadcasting transmission and no signal is detected. Auto Off set to Off will cancel the function.
Note : After no signal is detected within 60 minutes, switching TV to any channel with signal will cancel the
Auto Off function.
cursor buttons to select Off option.
19
Advertisement
Table of Contents
