American Standard Reminiscence 3311.028 Specifications

REMINISCENCE™ ELONGATED TOILET
❑ 2011.026
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl with
2" trapway
• AquaForce flushing technology
• Bowl rim height at 381mm (15")
• Vintage detailing on bowl and tank–design
matched to pedestal and countertop lavatories
• Side-mounted antique styled chrome trip lever
with ceramic handle insert
• 2 bolt caps
• Internal trapway area fully glazed
• 100% factory flush tested
❑ 3311.028 Bowl
❑
4111.016 Tank
Nominal Dimensions:
768 x 508 x 826mm
(30-1/4" x 20" x 32-1/2")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specified:
❏ Color:
❏ Seat: American Standard #5324.019 "Rise and
Shine" solid plastic closed front seat with cover.
❏ Alternate Seat: American Standard #5311.012
"Laurel" molded closed front seat with cover.
❏ Supply with stop:
© 2008 AS America Inc.
Shown with
FINISHED WALL
768mm
(30-1/4)
25mm ± 6mm
(1 ± 1/4)
229mm
(9)
C/L OF SEAT POST HOLES
(140mm CENTERS)
(5-1/2)
476mm
(18-3/4)
76mm
(3)
363mm
(14-1/2)
13mm
(1/2)
159mm
(6-1/4)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
K42
REMINISCENCE™
ELONGATED TOILET
VITREOUS CHINA
5311.012
"Laurel" seat
508mm
(20)
C/L
406mm
(16)
SUPPLY AS
REQUIRED
381mm
(15)
*
222mm
(8-3/4)
*
140mm
(5-1/2)
FINISHED
279mm
FLOOR
(11)
Revised 2/08
826mm
(32-1/2)