Removing And Replacing The Oven Door And Drawer - LG LRE3027ST Owner's Manual

Electric range
Hide thumbs Also See for LRE3027ST:
Table of Contents

Advertisement

Available languages

Available languages

REMOvING ANd REPLACING THE
OvEN dOOR ANd dRAwER
cAUtiON
• The door is very heavy. Be careful when removing
and lifting the door.
• DO NOT lift the door by the handle.
• DO NOT hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring or stressing the glass
may weaken its structure, causing an increased risk
of breakage at a later time.
Removing the oven door
1. Fully open the door. Pull the hinge locks down
toward the door frame, to the unlocked position. A
tool, such as a small flat-blade screwdriver, may be
required.
Slot
Hinge lock
Push hinge locks down to unlock
2. Firmly grasp both sides of the door at the top.
Close the door to the removal position (approxi-
mately five degrees) which is halfway between the
broil stop position and fully closed.
About 5˚
Removal Position
3. Lift the door up and out until the hinge arm is clear
of the slot. Put the door on the floor.
Replacing the oven door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal
Hinge arm
Door frame
3. Fully open the door. If the door will not fully open,
4. Push the hinge locks down against the front frame
cARE ANd cLEANiNg
Hinge arm
position, seat the indentation of the hinge arm into
the bottom edge of the hinge slot. The notch in the
hinge arm must be fully seated into the bottom of
the slot.
Slot
Push hinge locks up to lock
the indentation is not seated correctly in the bottom
edge of the slot.
of the oven cavity to the locked position. Close the
oven door.
39
Bottom edge
of slot
Indentation
Hinge lock
Hinge arm
Door frame

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents