Specifications; Unpacking - Homelite VERSALITE UT41002A Operator's Manual

MOTOR
Motor Type ......................................................................................................................................................... 120 V AC
Operating RPM ......................................................................................................................................................... 7500
Amperage .............................................................................................................................................................. 6 amps
DRIVE SHAFT AND CUTTING HEAD
Drive Shaft ............................................................................................................................................. 1/4 in. Flex Shaft
Cutting Head ...................................................................................................................................... Bump Line Release
Cutting Path Diameter .............................................................................................................................. 15 in. (381 mm)
Drive Shaft Housing ................................................................................................................................. Aluminum Tube
Cutting Line Diameter ............................................................................................................................... .080 in. (2 mm)
INFORMATION
Carefully remove the parts from the box.
Inspect the parts carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call
1-800-242-4672 for assistance.

SPECIFICATIONS

UNPACKING

PACKING LIST
Upper shaft (Power head) (1)
Attachment shaft (Cutting head) (1)
Front Handle (1)
Carriage bolt - 6 mm x 50.0 mm (1)
Flat washer - 6 mm (1)
Wing nut - 6 mm (1)
Grass deflector (1)
Wing nut - 1/4 in. (1)
Flat washer - 1/4 in. (1)
Lock washer - 1/4 in. (1)
Hex bolt - 1/4 in. x 2 in. (1)
Operator's manual
If any parts are missing, replace them before operat-
ing the product. Failure to do so could result in
serious personal injury.
Page 6
WARNING