CHANNEL 1, 2, 3, 4
Presetting the Audio Devices
To avoid sudden and unusable sound out-
puts from the audio devices connected to the
mixer's output, adjust the audio devices' vol-
ume controls to minimum and set their power
controls to off before you connect the mixer's
output jacks to the audio devices' input jacks.
MAKING THE
CONNECTIONS
You can connect the line level outputs of
several input sources (such as a CD player,
a cassette player, the audio output of a VCR,
a tuner, or other input source) to the mixer.
The
input jacks let you connect up to
LINE
two stereo sources.
The
input jacks let you connect up to
MIC
four microphones.
Note: Use shielded audio cables for all con-
nections (available at your local RadioShack
store).
4
Connecting Two Stereo Inputs
POWER ON/OFF
To connect two stereo sources, use the two
MODE STEREO/MONO
pairs of
(for example, use
(right) for a CD player, and jacks
4
for each of these sources are routed to the
corresponding output channel.
Connecting up to Four Stereo
Sources as Monaural Inputs
To connect up to four stereo sources as
monaural inputs, using shielded Y-adapters
at the sources' left and right outputs, connect
a separate stereo source to each channel
(
LINE
of these sources are routed to the corre-
sponding output channel.
Connecting up to Four Monaural
Inputs
To connect up to four monaural sources, use
LINE
Preparation
and
LEFT
RIGHT
jacks
LINE
(right) for a cassette player). The signals
jacks
through
). The signals for each
1
4
jacks
through
to connect a separate
1
4
phono input jacks
(left) and
1
2
(left) and
3