Confirmation After Installation - Mazda CX-9 Accessory Installation Manual

4．CONFIRMATION AFTER INSTALLATION
１． Be sure that here are no excessive gaps.
• If there are any gaps, loosen all the bolts and then retighten them in the order of top, middle, and bottom while pressing
the mud flap (front) against the vehicle.
2．Be sure that all bolts are securely tightened.
5．MUD FLAP (FRONT) PRECAUTIONS
CAUTION
• If gasoline, engine coolant, or battery fluid adheres to the painted surface of the resin parts, it will cause
discoloration, stains, or paint peeling. Wipe it off with a soft cloth immediately.
• Don't drive through an automatic car wash; it may damage the mud flap (front).
• Do not use car polish containing wax compounds. Otherwise, the paint could be damaged.
• If the vehicle height is lowered due to the vehicle being at maximum passenger or cargo capacity,
decrease the vehicle speed when parking on a road shoulder or entering/leaving a road shoulder or bump.
Otherwise, the mud flaps (front) could be damaged.
6