#1
Put a soft cushion on the desk and lay the stand on
its side so that the base is accessible.
#3
Pry the hinge cover by flat-tip screw driver or jig and
be careful to prevent from scratching the hinge
cover.
#5
Pull up the front cover side by side(4 sides) and take
away the front cover
DISASSEMBLY
#2
Twist the stand assy until "click" , then take out the
stand assy into the product in the
correct direction as shown in picture.
#4
Unscrew the 4 screws on the hinge to separate the
hinge neck ass'y
.
#6
Turn over the set and pull up the cabinet to separate
the control cable, then take away the back cover
8