Configurations; Part Names - Epson TM-U220 Series Service Manual

Confidential

Configurations

This TM-U220 is configured by combining features from the list below.
Table 1-1 Configurations
Features
Interface types
Paper width selections
Power supply unit types
Installation positions
Note: Selections in the table above may be added to or changed in the future.
dpi: dots per 25.4 mm (dots per inch)

Part Names

The figure below shows part names for the TM-U220.
1-2 Product Overview
Selection
UB-S01 (RS-232)
UB-P02II (IEEE 1284 (bidirectional parallel))
EPSON UB universal interface board
options
76, 69.5, or 57.5 mm {3", 2.74", or 2.26"}
Exclusive external power supply for the
alphanumeric model:
AC Adapter C (North America only)
(pre-packaged).
External power supply unit for the
multilingual model:
PS-180
Horizontally (default)
Vertically by use of the optional WH-10
wall-hanging bracket
Roll paper cover
Control panel
Description
Use an EPSON-approved interface board
Be sure to change the paper guide
spacer if paper of a different width is used.
Then, set the customized value in printer
memory for the correct paper width. For
details about how to set the paper width,
see Chapter 6, "Installation."
Do not use the AC Adapter C with the
multilingual model.
Ribbon cassette cover
Power switch
Rev. B